This manual should be maintained in legible condition and kept adjacent to the heater or in another safe placefor future reference.Catalog No. 5000.64
2IntroductionThe Raypak Y-200 Series Controller, equipped withthe Y-305 4-20 mA / 2-10 VDC Module, provides theultimate in temperature setpoint contro
3Fig. 1: ComponentsY-200 Control Board (P/N 601670) Y-305 4-20 mA /2-10 VDC Module (P/N 601740) Nylon stand-off (P/N 550767) 2-pin plug connector (P
4Start-up4-20 mA Mode1. Set the SW1-2 dip switch (4-20 mA) to the ONposition, and the SW1-1 dip switch (2-10 VDC) tothe OFF position.2. Restore powe
5Module Adjustment4-20 mA Module1. Set the input device signal to 12 mA.2. Remove 2-pin connector from J1 connector onModule.3. Verify 12 mA input
6LIMITED WARRANTY Y-305 4-20 mA / 2-10 VDC Module for Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control SystemSCOPE OF WARRANTYRay
7
Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 Fax (805) 278-5468Litho in U.S.A.www.raypak.com
Comments to this Manuals