Raypak RP2100 ASME Operations Instructions download pdf (Page 32)

CONTROL PANEL REMOVAL

1. Remove screw from front door. Set aside door for

serviceability.

CONTROL ADJUSTMENTS - MILLIVOLT MODELS

he water temperature is controlled by the heater ther-

mostat on the upper front panel of the heater. The

control center contains an On/Off switch and one ther-

mostat.

The thermostat is fitted with a means of limiting the

upper temperature limit below the maximum level.

The knob stop adjustment ring illustrated below is

adjustable by loosening the set screw, rotating the

knob stop ring to the desired location and re-tightening

the set screw.

SPA TEMPERATURE

RANGE

POOL TEMPERATURE

RANGE

KNOB STOP RING

SET SCREW

STAND-BY

TEMPERATURE

KNOB STOP SHOWN ABOVE IS

IN THE SPA TEMPERATURE RANGE

KNURLED

SCREW

Temp Adjust Buttons

Mode Button

LCD Display

OFF

2. Remove (4) screws from sides of control panel.

3. Rotate control panel down until panel stops. Do

not force.

NOTE: Caution must be used to not damage controls

or wiring.

CONTROL ADJUSTMENTS -

DIGITAL AND ADVANCED FLAME TECHNOLOGY

(AFT) MODELS

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

No comments

Raypak RP2100 ASME Operations Instructions Page 32